Facility acknowledgment for publications
All users are asked to submit information about their resulting publications to the FRIB Manager for User Relations (useroffice@frib.msu.edu). In the future, publication information will be entered on the FRIB Scientific User Portal.
To the extent possible, an acknowledgment of Federal support must appear in the publication of any material, whether copyrighted or not, based on or developed using FRIB resources, as follows:
- Acknowledgment: "This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics and used resources of the Facility for Rare Isotope Beams (FRIB) Operations, which is a DOE Office of Science User Facility under Award Number DE-SC0023633.”
Users must submit their publication information to the DOE Energy Link (E-Link) System.
FRIB Beam Power Ramp-up: Status and Plans
Proceedings of HB2023, Geneva, Switzerland
doi: 10.18429/JACoW-HB2023-THC1I2
Optimizing the Sextupole Configuration for Simultaneous Correction of Third Order Resonances at the Recycler Ring
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-MOPS16
Optimizing Current Density Measurements for Intense Low Beta Electron Beams
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-WEPG63
Wide Range Tune Scan for the Hadron Storage Ring of the Electron-ion Collider
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-MOPC79
Developing Nested Auto-Differentiation Tracking Code for Beam Dynamics Optimization
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-WEPR59
Design automation of pre-separator wedges for FRIB advanced rare isotope separator
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-THPR25
Thermal analysis of rotating single slice graphite target system for FRIB
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-THPS41
FPGA design of FRIB chopper monitor system
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-THPG63
Measuring uniformity and gas density of gas sheet profile monitor for use with heavy-ion accelerators
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-WEPG35
Time-interleaved-sampling for high bandwidth BPM signals
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-WEPG34
Development of inductive high temperature oven (HTO) at the facility for Rare Isotope Beams
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-MOPR70
Operation Status of FRIB Wedge Systems and Plan for Power Ramp Up
15th International Particle Accelerator Conference (IPAC24), Nashville, TN, May 19-24, 2024
doi: 10.18429/JACoW-IPAC2024-THPR24